Warren Services

Haas VF-4 vertical machining centre Travel without trunion 1,270 x 508 x 635 mm (xyz) Trunion table TR-160 adds 4th & 5th axis operation, restricting machine area to 445mm max swing
Haas EC1600 horizontal Mill Travel 1,626 x 1016 x 813 mm (xyz)6,000-rpm 50 Taper spindle 30-hp Vector dual drive 5-degree indexing table 30+1 Side-mount tool changer
Eikon MV3 1800 CNC Mill Table size – 2000 x 1000mm X axis – 1800mm Y axis – 500mm Z axis – 450mm Rapid traverse – 40m/min Spindle speed – 12000 Spindle power – 11kW Tool capacity – 20(36) Tool taper – 40
Dahlih 1020 CNC Mill Max table load – 1000kg Travel – X-1020mm Y-550mm Z-560mm Tool holder – BT40
Dahlih 720 CNC Mill Working surface – 950x560mm Max table load – 500kg Travel – X-720mm Y-460mm Z-510mm Tool holder – BT40
Haas TM-2 Tool Room Mill Travels – X - 1016mm, Y – 406mm, Z – 406mm Spindle nose to table: Min- 102mm Max- 508mm Table – 1466.9mm x 267mm Max weight on table – 454kg
Haas TM-1 Tool Room Mill Travels – X - 762mm, Y – 305mm, Z – 406mm Spindle nose to table: Min- 102mm Max- 508mm Table – 1212.9mm x 267mm T-slot width – 16mm T-slot centre distance – 101.6mm Max weight on table – 454kg
Soraluce SP6000 Fixed Table CNC Travelling Column Bed Milling Machine Heidenhain CNC control 30 position automatic tool changer Width of the machine table is 6m x 1.1m. Long Traverse is 4.5m. Vertical Traverse is 1.6m. Cross Traverse is 1.2m Maximum weight - 3000kg/m2.

Haas TL-2 CNC Lathe Max swing over cross slide – 282mm Max swing over bed – 720mm Distance between centres – 1219mm
GHT 4 G2 CNC Lathe Max swing over cross slide – 370mm Max swing over bed – 720mm Distance between centres – 1000-3500mm Cross slide travel - 400mm Bed width – 430mm Main motor power 17kW Speed range – 0-400 400-1600(2) min-1 Max weight between centres – 1000kg Tailstock quill diameter – 100mm
Puma 400 LMB CNC Lathe Chuck size – 380mm Max turning diameter – 560mm Max work piece length – 2028mm Max weight on spindle (inc chuck) Chucking work-700kg Shaft work- 2000kg Max bar dia. – 116.5mm Rotary tool power - 7.5kW Rotary tool speed – 3000rpm
Nakamura-Tome SC-300 CNC Lathe Max turning diameter 17” Parts catcher Bar feeder Length of parts – 600mm Spindle hole – 75mm
Alpha 400S CNC Lathe Bed width 12.5” 3 jaw chuck Distance between centres 50” Gap width from faceplate Spindle motor – 10HP Spindle nose/spindle bore – D1-6” / 2.125” Spindle speeds (3 ranges) – 15 - 2500rpm Swing in removable gap Swing over bed – 15.75” Swing over cross slide – 9.625 Tailstock diameter – 2.5” Tailstock quill taper/quill travel - #5 MT / 5.75’
Mori Seiki Lathe

A20Citizen CNC Lathe

3 - 20mm diameter bar stock capacity
6 fixed front and back working cutting tools
3 live tools
4 front and back working stationary tools
driven main and sub spindle
bar feeder Lathe

A32Citizen CNC Lathe

Max. turning diameter 20mm 32mm
Max. turning length (in one chucking) 165mm
320mm
A rapid feed rate of 45m/min, high speed processing
with the latest NC unit, and Citizen's unique Cincom Control technology, it achieves 30% higher productivity than previous machines
The machine is equipped with 7 axes, 6 turning tools, 4 rotary tools for cross-machining, 9 tools for back-end machining and 5 tools for front-end machining giving a total of 23 tools allowing great flexibility

The Duo 400 parts cleaning system is a natural progression of the established Solo system. The Duo has the added benefits of flood / immersion washing, which provides higher standards of cleaning by full solution contact with all component surfaces, and a re-circulating heated spray rinse, which provides higher standards of surface finish by removing detergent residues left by the wash solution.

The rinse stage can also be used to apply a longer term corrosion inhibitor for ferrous components. All finished off with a hot air dry.

Aqua-Save

The system has been developed for the treatment and recycling of industrial waste water, including wash water from parts cleaning equipment and waste coolant from metalworking operations, resolving the problem of expensive off-site treatment and disposal

Wire eroder (Cut 20)

Travel 350 x 250 x 250 mm (xyz)
Max workpiece weight 400 kg
Max workpiece size 940 x 680 x 250
Max taper angle +/-25degrees over 80mm
Wire diameters 0.15 to 0.30 mm

Drill(Spark Eroder)

The DRILL 20 is a production machine designed for the drilling of parts in hard materials such as hardened steels orcarbides.
Its drilling capability ranges from 0.15 to 3.0 mm diameter through a depth of 200 mm

Precision CNC Milling and Turning - EDM (wire)

Equipment List:

Latest News